Unplug the washing machine from the outletHow to Clean the Water Inlet Valve on an Washing Machine.
Move the washer away from the wall enough so that you can work comfortably behind the machine. Be careful not to pull it out as well far or you might disconnect the drain hose or damage the water supply hoses.
Turn off the water provide in the supply valve positioned on the wall behind the washer by turning the knob clockwise.
Unscrew the water supply hose from the back from the washing machine. Have a towel or bucket handy, as some water can drip out. Use the pliers when the hose coupling is difficult to move or stuck in location.
Remove the water inlet screen with your finger or possibly a pair of needle-nose pliers. Brush out any dirt or grit. You can soak the inlet screen within a mild solution of water and vinegar if it can be calcifiedHow to Clean the Water Inlet Valve on an Washing Machine.
Fix Washing Machine Problems
the clean water inlet screen back into the inlet valve on the washer. Attach the water supply hose. Be sure that the hose is screwed on tight.
the washing machine back into the outlet.
Run a test load without any clothes. Ensure that the water provide hose is on tight and one can find no leaks. Move the washing machine back into its original location when satisfied.
How To Clean The Water Inlet Valve On An Washing Machine
How To Move A Washing Machine To A Brand New Space In An Old Home | bestwashingmachinex.com