jamescwifbのブログ

アクセスカウンタ

zoom RSS How to create a Baby Cradle Bedding

<<   作成日時 : 2012/04/27 08:59   >>

ブログ気持玉 0 / トラックバック 3 / コメント 0





Fitted Sheet


1

Make a fitted sheet for the cradle mattress. Measure the length, width and depth with the mattress. Use the pen and paper to jot down all measurements for future reference.


2

Cut out a piece of cotton towards the measurements in the mattress, plus three inches all of the way around, to produce a fitted mattress.


3

Fold the fabric into quarters, making sure all from the corners match up. Set the bowl on the corner of the fabric so that the bowl touches each sides from the corner with a little further fabric hanging out at the point from the corner.


4

Draw about the bowl in the edge with the fabric, employing the pencil to produce a cutting mark. Cut on the mark to produce curved edges for the fitted sheetHow to make a Baby Cradle Bedding.


5

Place the fabric on a flat surface using the wrong side up. Fold under the raw edges to form a casing. Leave a 1-inch opening to insert the elastic.


6

Measure the distance around the mattress and subtract 5 inches. Cut the elastic to this measurement.


7

Insert one of the safety pins into 1 finish with the elastic and attach it towards the fitted sheet next towards the 1-inch opening. Insert the other safety pin into the free end from the elastic.


8

Feed the elastic via the casing working with the safety pin to help youHow to produce a Baby Cradle Bedding. Pull out the safety pins and sew the ends from the elastic together. Close the opening.


Flat Sheet


9

Cut a piece of fabric to the same measurements as for the fitted sheet.


10

Turn below all of the raw edges 1/2 inch. Use pins to hold the fabric in spot.


11

Sew all the way around the sheet to form a hem and complete the flat sheet.


Quilt


12

Cut out enough 4-inch squares of fabric to equal a little more than your measurements for the sheets.


13

Sew the squares into rows then sew the rows with each other. Iron the quilt top.


14

Layer
best baby boy bedding
the quilt leading together with the batting and some backing fabric. Pin the layers together.


15

Top-stitch to sew the layers with each other. Fold below the raw edges and pin to hold the fabric
babyboybeddingonline.com
in location.


16

Sew all about the edge of the quilt to form a hem and complete the quilt.


月別リンク

ブログ気持玉

クリックして気持ちを伝えよう!
ログインしてクリックすれば、自分のブログへのリンクが付きます。
→ログインへ

トラックバック(3件)

タイトル (本文) ブログ名/日時
プラダ バッグ
How to create a Baby Cradle Bedding jamescwifbのブログ/ウェブリブログ ...続きを見る
プラダ バッグ
2013/07/06 06:18
プラダ アウトレット
How to create a Baby Cradle Bedding jamescwifbのブログ/ウェブリブログ ...続きを見る
プラダ アウトレット
2013/07/07 00:10
プラダ トート
How to create a Baby Cradle Bedding jamescwifbのブログ/ウェブリブログ ...続きを見る
プラダ トート
2013/07/07 18:25

トラックバック用URL help


自分のブログにトラックバック記事作成(会員用) help

タイトル
本 文

コメント(0件)

内 容 ニックネーム/日時

コメントする help

ニックネーム
本 文
How to create a Baby Cradle Bedding jamescwifbのブログ/BIGLOBEウェブリブログ
文字サイズ:       閉じる